§ 732.01. Monuments  


Latest version.
  • Monuments shall be placed by the applicant on all subdivision boundary lots and block corners, angle points, points of curves in streets and at intermediate points as required by the Public Works Director, and shall meet the following specifications:

    A. Subdivision boundary monuments shall be iron pins not less than 12 inches long and ½ inch in diameter, or concrete posts. All monuments shall be set flush with the ground.

    B. Lot monuments shall be iron pins not less than 12 inches long and ½ inch in diameter set flush with the ground.

    C. Where existing monuments have been located and are accurately represented, they may be permitted to remain in position.

(Code 1996, § 7-8-4-12-010; Ord. No. 5575, 6-12-1996)